Radical-Driven Crystal-Amorphous-Crystal Transition of a Metal-Organic Framework.

Self-assembly-based structural transition has been explored for various applications, including molecular machines, sensors, and drug delivery. In this study, we developed new redox-active metal-organic frameworks (MOFs) called DGIST-10 series that comprise π-acidic 1,4,5,8-naphthalenediimide (NDI)-based ligands and Ni2+ ions, aiming to boost ligand-self-assembly-driven structural transition and study the involved mechanism. Notably, during the synthesis of the MOFs, a single-crystal-amorphous-single-crystal structural transition occurred within the MOFs upon radical formation, which was ascribed to the fact that radicals prefer spin-pairing or through-space electron delocalization by π-orbital overlap. The radical-formation-induced structural transitions were further confirmed by the postsynthetic solvothermal treatment of isolated nonradical MOF crystals. Notably, the transient amorphous phase without morphological disintegration was clearly observed, contributing to the seminal structural change of the MOF. We believe that this unprecedented structural transition triggered by the ligand self-assembly magnifies the structural flexibility and diversity of MOFs, which is one of the pivotal aspects of MOFs.

Randomized clinical trial of pulpotomy using a premixed injectable calcium silicate cement on mature permanent teeth with reversible pulpitis.

The aim of this two-center randomized controlled trial was to assess the outcomes and relative factors associated with pulpotomies performed using a premixed injectable calcium silicate cement, as compared to mineral trioxide aggregate in mature permanent premolar and molar teeth with reversible pulpitis. Included teeth were randomly divided into two groups according to pulpotomy material (ProRoot MTA [PMTA] group, Endocem MTA Premixed [EPM] group). After pulp exposure, the superficial pulp was either removed to a depth of 2 mm (partial pulpotomy) or completely amputated to the level of the root canal orifice (full pulpotomy). A 3-mm layer of either material was randomly placed over the pulp wound, followed by the application of a thin layer of a light-cured glass ionomer composite liner. The restoration procedure was then carried out during the same visit. After one year of treatment, the pulpotomy success rate was 94.4% (67/71), with no significant difference between the PMTA and EPM groups. The success rate was 93.9% in the PMTA group and 97.1% in the EPM group. There were no significant factors related to the procedures. EPM is a viable alternative to PMTA for single-visit pulpotomies of permanent premolars and molars.

In-Car Environment Control Using an SSVEP-Based Brain-Computer Interface with Visual Stimuli Presented on Head-Up Display: Performance Comparison with a Button-Press Interface.

Controlling the in-car environment, including temperature and ventilation, is necessary for a comfortable driving experience. However, it often distracts the driver's attention, potentially causing critical car accidents. In the present study, we implemented an in-car environment control system utilizing a brain-computer interface (BCI) based on steady-state visual evoked potential (SSVEP). In the experiment, four visual stimuli were displayed on a laboratory-made head-up display (HUD). This allowed the participants to control the in-car environment by simply staring at a target visual stimulus, i.e., without pressing a button or averting their eyes from the front. The driving performances in two realistic driving tests-obstacle avoidance and car-following tests-were then compared between the manual control condition and SSVEP-BCI control condition using a driving simulator. In the obstacle avoidance driving test, where participants needed to stop the car when obstacles suddenly appeared, the participants showed significantly shorter response time (1.42 ± 0.26 s) in the SSVEP-BCI control condition than in the manual control condition (1.79 ± 0.27 s). No-response rate, defined as the ratio of obstacles that the participants did not react to, was also significantly lower in the SSVEP-BCI control condition (4.6 ± 14.7%) than in the manual control condition (20.5 ± 25.2%). In the car-following driving test, where the participants were instructed to follow a preceding car that runs at a sinusoidally changing speed, the participants showed significantly lower speed difference with the preceding car in the SSVEP-BCI control condition (15.65 ± 7.04 km/h) than in the manual control condition (19.54 ± 11.51 km/h). The in-car environment control system using SSVEP-based BCI showed a possibility that might contribute to safer driving by keeping the driver's focus on the front and thereby enhancing the overall driving performance.

Transcranial alternating current stimulation over multiple brain areas with non-zero phase delays other than 180 degrees modulates visuospatial working memory performance.

While zero-phase lag synchronization between multiple brain regions has been widely observed, relatively recent reports indicate that systematic phase delays between cortical regions reflect the direction of communications between cortical regions. For example, it has been suggested that a non-zero phase delay of electroencephalography (EEG) signals at the gamma frequency band between the bilateral parietal areas may reflect the direction of communication between these areas. We hypothesized that the direction of communication between distant brain areas might be modulated by multi-site transcranial alternating current stimulation (tACS) with specific phase delays other than 0° and 180°. In this study, a new noninvasive brain stimulation (NIBS) method called multi-site multi-phase tACS (msmp-tACS) was proposed. The efficacy of the proposed method was tested in a case study using a visuospatial working memory (VWM) paradigm in which the optimal stimulation conditions including amplitudes and phases of multiple scalp electrodes were determined using finite element analysis adopting phasor representation. msmp-tACS was applied over the bilateral intraparietal sulci (IPS) and showed that 80 Hz tACS with the phase for the right IPS leading that for the left IPS by 90° (= 3.125 ms) partialized VWM performance toward the right visual hemifield. The three stimulation conditions were synchronized, RL, and LR, which refers to stimulation condition with no phase lag, stimulation phase of right IPS (rIPS) leading left IPS (lIPS) by 90° and the stimulation of lIPS leading rIPS by 90°, respectively. The lateralization of VWM significantly shifted towards right visual hemifield under the RL condition compared to the synchronized and LR conditions. The shift in VWM was the result of the stimulation affecting both left and right visual hemifield trials to certain degrees, rather than significantly increasing or decreasing VWM capacity of a specific visual hemifield. Altered brain dynamics caused by msmp-tACS partialized VWM performance, likely due to modulation of effective connectivity between the rIPS and lIPS. Our results suggest that msmp-tACS is a promising NBS method that can effectively modulate cortical networks that cannot be readily modulated with conventional multi-site stimulation methods.

Selection of the optimal channel configuration for implementing wearable EEG devices for the diagnosis of mild cognitive impairment.

BACKGROUND: Early diagnosis of mild cognitive impairment (MCI) is essential for timely treatment planning. With recent advances in the wearable technology, interest has increasingly shifted toward computer-aided self-diagnosis of MCI using wearable electroencephalography (EEG) devices in daily life. However, no study so far has investigated the optimal electrode configurations for the efficient diagnosis of MCI while considering the design factors of wearable EEG devices. In this study, we aimed to determine the optimal channel configurations of wearable EEG devices for the computer-aided diagnosis of MCI. METHOD: We employed an EEG dataset collected from 21 patients with MCI and 21 healthy control subjects. After evaluating the classification accuracies for all possible electrode configurations for the two-, four-, six-, and eight-electrode conditions using a support vector machine, the optimal electrode configurations that provide the highest diagnostic accuracy were suggested for each electrode condition. RESULTS: The highest classification accuracies of 74.04% ± 4.82, 82.43% ± 6.14, 86.28% ± 2.81, and 86.85% ± 4.97 were achieved for the optimal two-, four-, six-, and eight-electrode configurations, respectively, which demonstrated the possibility of precise machine-learning-based diagnosis of MCI with a limited number of EEG electrodes. Additionally, further simulations with the EEG dataset revealed that the optimal electrode configurations had significantly higher classification accuracies than commercial EEG devices with the same number of electrodes, which suggested the importance of electrode configuration optimization for wearable EEG devices based on clinical EEG datasets. CONCLUSIONS: This study highlighted that the optimization of the electrode configuration, assuming the wearable EEG devices can potentially be utilized for daily life monitoring of MCI, is necessary to enhance the performance and portability.

Optimization of a lumbar interspinous fixation device for the lumbar spine with degenerative disc disease.

Interspinous spacer devices used in interspinous fixation surgery remove soft tissues in the lumbar spine, such as ligaments and muscles and may cause degenerative diseases in adjacent segments its stiffness is higher than that of the lumbar spine. Therefore, this study aimed to structurally and kinematically optimize a lumbar interspinous fixation device (LIFD) using a full lumbar finite element model that allows for minimally invasive surgery, after which the normal behavior of the lumbar spine is not affected. The proposed healthy and degenerative lumbar spine models reflect the physiological characteristics of the lumbar spine in the human body. The optimum number of spring turns and spring wire diameter in the LIFD were selected as 3 mm and 2 turns, respectively-from a dynamic range of motion (ROM) perspective rather than a structural maximum stress perspective-by applying a 7.5 N∙m extension moment and 500 N follower load to the LIFD-inserted lumbar spine model. As the spring wire diameter in the LIFD increased, the maximum stress generated in the LIFD increased, and the ROM decreased. Further, as the number of spring turns decreased, both the maximum stress and ROM of the LIFD increased. When the optimized LIFD was inserted into a degenerative lumbar spine model with a degenerative disc, the facet joint force of the L3-L4 lumbar segment was reduced by 56%-98% in extension, lateral bending, and axial rotation. These results suggest that the optimized device can strengthen the stability of the lumbar spine that has undergone interspinous fixation surgery and reduce the risk of degenerative diseases at the adjacent lumbar segments.

Novel Hybrid Brain-Computer Interface for Virtual Reality Applications Using Steady-State Visual-Evoked Potential-Based Brain-Computer Interface and Electrooculogram-Based Eye Tracking for Increased Information Transfer Rate.

Brain-computer interfaces (BCIs) based on electroencephalogram (EEG) have recently attracted increasing attention in virtual reality (VR) applications as a promising tool for controlling virtual objects or generating commands in a "hands-free" manner. Video-oculography (VOG) has been frequently used as a tool to improve BCI performance by identifying the gaze location on the screen, however, current VOG devices are generally too expensive to be embedded in practical low-cost VR head-mounted display (HMD) systems. In this study, we proposed a novel calibration-free hybrid BCI system combining steady-state visual-evoked potential (SSVEP)-based BCI and electrooculogram (EOG)-based eye tracking to increase the information transfer rate (ITR) of a nine-target SSVEP-based BCI in VR environment. Experiments were repeated on three different frequency configurations of pattern-reversal checkerboard stimuli arranged in a 3 × 3 matrix. When a user was staring at one of the nine visual stimuli, the column containing the target stimulus was first identified based on the user's horizontal eye movement direction (left, middle, or right) classified using horizontal EOG recorded from a pair of electrodes that can be readily incorporated with any existing VR-HMD systems. Note that the EOG can be recorded using the same amplifier for recording SSVEP, unlike the VOG system. Then, the target visual stimulus was identified among the three visual stimuli vertically arranged in the selected column using the extension of multivariate synchronization index (EMSI) algorithm, one of the widely used SSVEP detection algorithms. In our experiments with 20 participants wearing a commercial VR-HMD system, it was shown that both the accuracy and ITR of the proposed hybrid BCI were significantly increased compared to those of the traditional SSVEP-based BCI in VR environment.

Biphasic Properties of PVAH (Polyvinyl Alcohol Hydrogel) Reflecting Biomechanical Behavior of the Nucleus Pulposus of the Human Intervertebral Disc.

PVAH is a mixture of solid and fluid, but its mechanical behavior has usually been described using solid material models. The purpose of this study was to obtain material properties that can reflect the mechanical behavior of polyvinyl alcohol hydrogel (PVAH) using finite element analysis, a biphasic continuum model, and to optimize the composition ratio of PVAH to replace the nucleus pulposus (NP) of the human intervertebral disc. Six types of PVAH specimens (3, 5, 7, 10, 15, 20 wt%) were prepared, then unconfined compression experiments were performed to acquire their material properties using the Holmes-Mow biphasic model. With an increasing weight percentage of PVA in PVAH, the Young's modulus increased while the permeability parameter decreased. The Young's modulus and permeability parameter were similar to those of the NP at 15 wt% and 20 wt%. The range of motion, facet joint force, and NP pressures measured from dynamic motional analysis of the lumbar segments with the NP model also exhibited similar values to those with 15~20 wt% PVAH models. Considering the structural stability and pain of the lumbar segments, it appears that 20 wt% PVAH is most suitable for replacing the NP.

Ti-Based porous materials for reactive oxygen species-mediated photocatalytic reactions.

Reactive oxygen species (ROS) are highly reactive oxidants that are typically generated by the irradiation of semiconducting materials with visible or UV light and are widely used for the photocatalytic degradation of toxic substances, photodynamic therapy, and selective organic transformations. In this context, TiO2 is considered to be among the most promising photocatalysts due to its high redox activity, structural stability, and natural abundance. In view of the extensive development of highly active photocatalysts, we herein briefly introduce TiO2 and the mechanisms of TiO2-mediated ROS generation, subsequently focusing on key advances in the design and synthesis of Ti-containing porous materials, such as porous TiO2, Ti-based metal-organic frameworks, and Ti-based metal-organic aerogels. In particular, this review highlights the significance of porosity and the structure-function relationship for the development of Ti-based photocatalysts. The structures, porosities, and ROS generation mechanisms of these materials as well as the related efficiencies of ROS-mediated photocatalytic organic transformations are discussed in detail to provide a useful reference for future researchers and to inspire the exploration of high-performance photocatalysts.

Brain-Controlled, AR-based Home Automation System using SSVEP-based Brain-Computer Interface and EOG-based Eye Tracker: A Feasibility Study for the Elderly End User.

Over the past decades, brain-computer interfaces (BCIs) have been developed to provide individuals with an alternative communication channel toward external environment. Although the primary target users of BCI technologies include the disabled or the elderly, most newly developed BCI applications have been tested with young, healthy people. In the present study, we developed an online home appliance control system using a steady-state visual evoked potential (SSVEP)-based BCI with visual stimulation presented in an augmented reality (AR) environment and electrooculogram (EOG)-based eye tracker. The performance and usability of the system were evaluated for individuals aged over 65. The participants turned on the AR-based home automation system using an eye-blink-based switch, and selected devices to control with three different methods depending on the user's preference. In the online experiment, all 13 participants successfully completed the designated tasks to control five home appliances using the proposed system, and the system usability scale exceeded 70. Furthermore, the BCI performance of the proposed online home appliance control system surpassed the best results of previously reported BCI systems for the elderly.

Estimation of Emotional Arousal Changes of a Group of Individuals During Movie Screening Using Steady-State Visual-Evoked Potential.

Neurocinematics is an emerging discipline in neuroscience, which aims to provide new filmmaking techniques by analyzing the brain activities of a group of audiences. Several neurocinematics studies attempted to track temporal changes in mental states during movie screening; however, it is still needed to develop efficient and robust electroencephalography (EEG) features for tracking brain states precisely over a long period. This study proposes a novel method for estimating emotional arousal changes in a group of individuals during movie screening by employing steady-state visual evoked potential (SSVEP), which is a widely used EEG response elicited by the presentation of periodic visual stimuli. Previous studies have reported that the emotional arousal of each individual modulates the strength of SSVEP responses. Based on this phenomenon, movie clips were superimposed on a background, eliciting an SSVEP response with a specific frequency. Two emotionally arousing movie clips were presented to six healthy male participants, while EEG signals were recorded from the occipital channels. We then investigated whether the movie scenes that elicited higher SSVEP responses coincided well with those rated as the most impressive scenes by 37 viewers in a separate experimental session. Our results showed that the SSVEP response averaged across six participants could accurately predict the overall impressiveness of each movie, evaluated with a much larger group of individuals.

Design of Wearable EEG Devices Specialized for Passive Brain-Computer Interface Applications.

Owing to the increased public interest in passive brain-computer interface (pBCI) applications, many wearable devices for capturing electroencephalogram (EEG) signals in daily life have recently been released on the market. However, there exists no well-established criterion to determine the electrode configuration for such devices. Herein, an overall procedure is proposed to determine the optimal electrode configurations of wearable EEG devices that yield the optimal performance for intended pBCI applications. We utilized two EEG datasets recorded in different experiments designed to modulate emotional or attentional states. Emotion-specialized EEG headsets were designed to maximize the accuracy of classification of different emotional states using the emotion-associated EEG dataset, and attention-specialized EEG headsets were designed to maximize the temporal correlation between the EEG index and the behavioral attention index. General purpose electrode configurations were designed to maximize the overall performance in both applications for different numbers of electrodes (2, 4, 6, and 8). The performance was then compared with that of existing wearable EEG devices. Simulations indicated that the proposed electrode configurations allowed for more accurate estimation of the users' emotional and attentional states than the conventional electrode configurations, suggesting that wearable EEG devices should be designed according to the well-established EEG datasets associated with the target pBCI applications.

Appropriate duration of peripherally inserted central catheter maintenance to prevent central line-associated bloodstream infection.

BACKGROUND/AIM: Prolonged maintenance of central venous catheters, including peripherally inserted central catheters (PICCs), is a major risk factor for central line-associated bloodstream infection (CLABSI). This study was conducted to evaluate the appropriate duration of PICC maintenance to prevent CLABSI. METHODS: A single-center retrospective study was conducted at an 824-bed tertiary hospital in Korea between January 2010 and December 2017. All hospitalized patients who underwent ultrasound-guided PICC insertion were enrolled. CLABSI was diagnosed according to the definitions of the National Health Safety Network. CLABSI caused by PICC was defined as PICC-associated bloodstream infection (PABSI). To identifying statistical correlations between catheter days and PABSI, the odds ratio for PABSI on the basis of the continuous value of catheter days was analyzed using restricted cubic spline splits with five knots. The optimal cut-off value for catheter days was identified by maximizing the area under the receiver operating characteristic (ROC) curve (AUC). RESULTS: A total of 1,053 patients underwent ultrasound-guided PICC insertion during the study period. Among them, 36 were confirmed as having a PABSI (3.5%, 36/1014; 1.14 per 1000 catheter days). In the restricted cubic spline regression, catheter days showed a dose-dependent relationship with the risk of PABSI. The AUC of the ROC curve for developing a PABSI according to the duration of catheter maintenance was 0.715 (95% CI, 0.639-0.790); the calculated optimal cut-off value was 25 days. CONCLUSION: The incidence of PABSI was 1.14 per 1000 catheter days and the optimal cut-off value of catheter days to avoid a PABSI was 25 days.

Comparison of Visual Stimuli for Steady-State Visual Evoked Potential-Based Brain-Computer Interfaces in Virtual Reality Environment in terms of Classification Accuracy and Visual Comfort.

Recent studies on brain-computer interfaces (BCIs) based on the steady-state visual evoked potential (SSVEP) have demonstrated their use to control objects or generate commands in virtual reality (VR) environments. However, most SSVEP-based BCI studies performed in VR environments have adopted visual stimuli that are typically used in conventional LCD environments without considering the differences in the rendering devices (head-mounted displays (HMDs) used in the VR environments). The proximity between the visual stimuli and the eyes in HMDs can readily cause eyestrain, degrading the overall performance of SSVEP-based BCIs. Therefore, in the present study, we have tested two different types of visual stimuli-pattern-reversal checkerboard stimulus (PRCS) and grow/shrink stimulus (GSS)-on young healthy participants wearing HMDs. Preliminary experiments were conducted to investigate the visual comfort of each participant during the presentation of the visual stimuli. In subsequent online avatar control experiments, we observed considerable differences in the classification accuracy of individual participants based on the type of visual stimuli used to elicit SSVEP. Interestingly, there was a close relationship between the subjective visual comfort score and the online performance of the SSVEP-based BCI: most participants showed better classification accuracy under visual stimulus they were more comfortable with. Our experimental results suggest the importance of an appropriate visual stimulus to enhance the overall performance of the SSVEP-based BCIs in VR environments. In addition, it is expected that the appropriate visual stimulus for a certain user might be readily selected by surveying the user's visual comfort for different visual stimuli, without the need for the actual BCI experiments.

Titanium-Carboxylate Metal-Organic Framework Based on an Unprecedented Ti-Oxo Chain Cluster.

Titanium(IV)-based metal-organic frameworks (Ti-MOFs) have received significant attention in recent years due to their numerous photocatalytic applications. We herein prepare the single-crystalline Ti-carboxylate MOF (DGIST-1) composed of an unprecedented Ti-oxo chain cluster and the porphyrinic ligand, TCPP (tetrakis(4-carboxyphenyl)porphyrin). Preformed Ti-oxo clusters were used as Ti4+ sources to avoid the spontaneous hydrolysis and condensation reactions of traditional Ti-alkoxide precursors, thus, enabling the formation of the highly crystalline Ti-MOF. The successfully activated DGIST-1 exhibited a higher surface area (i.e., 1957.3 m2 g-1 ) than previously reported Ti-MOFs due to its high crystallinity. Furthermore, the visible-light-responsive photocatalytic activity of DGIST-1 was confirmed by the simultaneous generation of singlet oxygen (1 O2 ) and superoxide (. O2 - ) species, in addition to the highly efficient and selective oxidation of benzyl alcohol to benzaldehyde.

Confined condensation synthesis and magnetic properties of layered copper hydroxide frameworks.

We present a confined condensation technique for the fabrication of layered copper hydroxide frameworks from lamellar copper-organic assemblies with long alkyl chains through the selective introduction of hydroxo bridging ligands. The complete transformations of two different lamellar copper-organic assemblies, Cu(C12H25SO4)2·4H2O (Cu-DS) and Cu2(C11H23CO2)4·2H2O (Cu-lau), into the corresponding layered copper hydroxide frameworks, Cu2(OH)3(C12H25SO4) (Cu-OH-DS) and Cu2(OH)1.8(C11H23CO2)2.2 (Cu-OH-lau), were achieved via confined condensation. The magnetic properties of both lamellar copper-organic assemblies, Cu-DS and Cu-lau, and both layered copper hydroxide frameworks, Cu-OH-DS and Cu-OH-lau, were investigated. It was found that drastic changes in the magnetic properties arise as a result of the confined condensation process.

Tribological changes in the articular cartilage of a human femoral head with avascular necrosis.

The present study evaluated the tribological properties of the articular cartilage surface of the human femoral head with postcollapse stage avascular necrosis (AVN) using atomic force microscopy. The cartilage surface in the postcollapse stage AVN of the femoral head was reported to resemble those of disuse conditions, which suggests that the damage could be reversible and offers the possibilities of success of head-sparing surgeries. By comparing the tribological properties of articular cartilage in AVN with that of osteoarthritis, the authors intended to understand the cartilage degeneration mechanism and reversibility of AVN. Human femoral heads with AVN were explanted from the hip replacement surgery of four patients (60-83 years old). Nine cylindrical cartilage samples (diameter, 5 mm and height, 0.5 mm) were sectioned from the weight-bearing areas of the femoral head with AVN, and the cartilage surface was classified according to the Outerbridge Classification System (AVN0, normal; AVN1, softening and swelling; and AVN2, partial thickness defect and fissuring). Tribological properties including surface roughness and frictional coefficients and histochemistry including Safranin O and lubricin staining were compared among the three groups. The mean surface roughness Rq values of AVN cartilage increased significantly with increasing Outerbridge stages: Rq = 137 ± 26 nm in AVN0, Rq = 274 ± 49 nm in AVN1, and Rq = 452 ± 77 nm in AVN2. Significant differences in Rq were observed among different Outerbridge stages in all cases (p < 0.0001). The frictional coefficients (µ) also increased with increasing Outerbridge stages. The frictional coefficient values were µ = 0.115 ± 0.034 in AVN0, µ = 0.143 ± 0.025 in AVN1, and µ = 0.171 ± 0.039 in AVN2. Similarly to the statistical analysis of surface roughness, significant statistical differences were detected between different Outerbridge stages in all cases (p < 0.05). Both surface roughness and frictional coefficient of cartilage, which were linearly correlated, increased with increasing Outerbridge stages in postcollapse AVN. The underlying mechanism of these results can be related to proteoglycan loss within the articular cartilage that is also observed in osteoarthritis. With regard to the tribological properties, the cartilage degeneration mechanism in AVN was similar to that of osteoarthritis without reversibility.

Penile length, digit length, and anogenital distance according to birth weight in newborn male infants.

PURPOSE: Anogential distance (AGD) and the 2:4 digit length ratio appear to provide a reliable guide to fetal androgen exposure. We intended to investigate the current status of penile size and the relationship between penile length and AGD or digit length according to birth weight in Korean newborn infants. MATERIALS AND METHODS: Between May 2013 and February 2014, among a total of 78 newborn male infants, 55 infants were prospectively included in this study. Newborn male infants with a gestational age of 38 to 42 weeks and birth weight>2.5 kg were assigned to the NW group (n=24) and those with a gestational age<38 weeks and birth weight<2.5 kg were assigned to the LW group (n=31). Penile size and other variables were compared between the two groups. RESULTS: Stretched penile length of the NW group was 3.3 ± 0.2 cm, which did not differ significantly from that reported in 1987. All parameters including height, weight, penile length, testicular size, AGD, and digit length were significantly lower in the LW group than in the NW group. However, there were no significant differences in AGD ratio or 2:4 digit length ratio between the two groups. CONCLUSIONS: The penile length of newborn infants has not changed over the last quarter century in Korea. With normal penile appearance, the AGD ratio and 2:4 digit length ratio are consistent irrespective of birth weight, whereas AGD, digit length, and penile length are significantly smaller in newborns with low birth weight.

Effects of hyaluronic acid and γ-globulin concentrations on the frictional response of human osteoarthritic articular cartilage.

Synovial fluid plays an important role in lubricating synovial joints. Its main constituents are hyaluronic acid (HA) and γ-globulin, acting as boundary lubricants for articular cartilage. The aim of the study was to demonstrate the concentration-dependent effect of HA and γ-globulin on the boundary-lubricating ability of human osteoarthritis (OA) cartilage. Normal, early and advance stage articular cartilage samples were obtained from human femoral heads and in presence of either HA or γ-globulin, cartilage frictional coefficient (µ) was measured by atomic force microscopy (AFM). In advanced stage OA, the cartilage superficial layer was observed to be completely removed and the damaged cartilage surface showed a higher µ value (∼ 0.409) than the normal cartilage surface (∼ 0.119) in PBS. Adsorbed HA and γ-globulin molecules significantly improved the frictional behavior of advanced OA cartilage, while they were ineffective for normal and early OA cartilage. In advanced-stage OA, the concentration-dependent frictional response of articular cartilage was observed with γ-globulin, but not with HA. Our result suggested that HA and γ-globulin may play a significant role in improving frictional behavior of advanced OA cartilage. During early-stage OA, though HA and γ-globulin had no effect on improving frictional behavior of cartilage, however, they might contribute to disease modifying effects of synovial fluid as observed in clinical settings.

Role of hyaluronic acid and phospholipid in the lubrication of a cobalt-chromium head for total hip arthroplasty.

The tribological performance of total hip arthroplasty has an important influence on its success rate. This study examined the concentration-dependent role of hyaluronic acid (HA) and phospholipid (dipalmitoylphosphatidylcholine, DPPC) in the boundary lubricating ability of retrieved cobalt-chromium femoral heads. The microscale frictional coefficients (µ) were measured by atomic force microscopy using a rectangular silicon cantilever integrated with sharp silicon tips. In the case of HA lubricant, the frictional coefficients decreased significantly at concentrations of 2.0 (0.16 ± 0.03) and 3.5 mg/ml (0.11 ± 0.01) while increased at 5.0 mg/ml (0.15 ± 0.01), compared to that with phosphate buffer saline (0.25 ± 0.03). The concentration-dependent lubrication behavior of DPPC was most effective when DPPC was in the physiological concentration range, showing µ = 0.16 ± 0.01 in polypropylene glycol, and 0.05 ± 0.01, 0.02 ± 0.01, and 0.03 ± 0.01 at a DPPC concentration of 0.05, 0.2, and 3.0 mg/ml, respectively. Results obtained show significant differences between the DPPC concentration groups. Conclusively, the microscale frictional response of the retrieved CoCr femoral head has a significant dependence on the concentrations of HA and DPPC. Moreover, observed optimal concentration of HA and DPPC for effective lubrication is similar to that observed in normal human synovial fluid. Therefore, a retrieval of the synovia may be considered during total hip replacement surgeries in an effort for reduction of friction between head and liner of total hip replacement implants.